Skip to content

Pre-trip check and defect reporting via QR

Updated:

Drivers run a roadworthiness check with the QR sticker and report defects; planning schedules them.

Open Vehicles & equipment in Fiatto
In this article

Besides the damage report, the QR sticker in a vehicle also opens the Pre-trip check and Report a defect — without logging in. What drivers report lands on the vehicle under Maintenance, blocks Pre-trip checks and Defect reports. The vehicle overview is at /dashboard/voertuigen.

Steps

  1. Create the sticker from the vehicle, Admin tab (Create QR code, Download PNG), and stick it in the vehicle.
  2. Set the policy under Settings → Data & compliance, Fleet block (Fleet — pre-trip check and defect reporting): Pre-trip check required, the maximum age of the last check and optionally your own Check items (one per line; empty = default list).
  3. The driver scans and chooses Pre-trip check: each item OK or not OK, then Is it safe to drive this vehicle? and Save check. With Report a defect they report a single fault with severity Attention — can drive, needs a look or Blocking — not safe to drive, optionally with photos.
  4. On the vehicle, schedule a defect with Plan (work order), or set it to Resolve or Dismiss.

Tips

  • A blocking defect makes the vehicle not roadworthy in the vehicle list, on the planning board and in deployability; the driver is advised not to drive off.
  • If the check is required, a vehicle with a driver but no recent check gets the signal Pre-trip check missing.
  • A collision with damage is reported via Start damage report on the same page — see report damage.
  • On the vehicle you can also record a defect yourself with Report a defect. See also maintenance.
  • Sticker lost or misused? Deactivate QR link on the Admin tab immediately invalidates every printed sticker for the vehicle, without issuing a new code. A disposed or inactive vehicle can no longer be reached via the QR code.
Was this article helpful?
View all articles in this topic

Find another answer

A task, feature or short question is enough.